User Manual

4 ST1000 Plus & ST2000 Plus Tiller Pilots
• SeaTalk compatibility also allows additional fixed and hand-held autopilot
control units to be easily connected at secondary steering and control posi-
tions
The ST1000 Plus and ST2000 Plus tiller pilots can also be used with any navigator
transmitting NMEA 0183 or NMEA 0180 data.
The tiller pilot can be calibrated to suit each installation to provide maximum
performance with many types of boat.
1.2 Specifications
General specifications
Power supply: 10 V to 15 V DC
Drive unit thrust torque: ST1000 Plus: 57 kg (125 lb)
ST2000 Plus: 77 kg (170 lb)
Maximum boat displace-
ment:
ST1000 Plus: 3 000 kg (6 600 lb)
ST2000 Plus: 4 500 kg (10 000 lb)
Drive mechanism: ST1000 Plus: lead-screw and nut drive
ST2000 Plus: re-circulating ball drive
Helm speed (lock to lock): ST1000 Plus: 8 seconds
ST2000 Plus: 4.5 seconds
Current consumption: • Standby: 40 mA (90 mA with full lighting)
• Auto: 0.5 A to 1.5 A depending on boat trim,
helm load and sailing conditions
Operating temperature: 0°C to +70°C (32°F to 158°F)
Main features: • 6 button digital keypad
• Backlit LCD display of heading, locked course
and navigational information
• User calibration for optimum performance
• WindTrim control in WindTrim mode
• SeaTalk compatible
• Automatic compass deviation correction
• Northerly/Southerly heading compensation
• Automatic heading deadband – seastate control
• Automatic tack
• Built-in navigator interface (NMEA and SeaTalk)
• Waypoint advance feature
81130_7.book Page 4 Friday, December 13, 2013 12:58 PM