Installation Instructions
Table Of Contents
- Chapter 1 Important information
- Certified Installation
- TFT Displays
- Water ingress
- Disclaimers
- RF exposure
- FCC
- Compliance Statement (Part 15.19)
- FCC Interference Statement (Part 15.105 (b))
- Industry Canada
- Industry Canada (Français)
- Japanese approvals
- Declaration of conformity
- Product disposal
- Pixel defect policy
- Warranty registration
- IMO and SOLAS
- Technical accuracy
- Chapter 2 Document and product information
- Chapter 3 Planning the installation
- 3.1 System integration
- 3.2 Installation checklist
- 3.3 Multiple data sources (MDS) overview
- 3.4 Identifying your display variant
- 3.5 Networking constraints
- 3.6 System protocols
- 3.7 Data master
- 3.8 a6x and a7x parts supplied
- 3.9 a9x and a12x parts supplied
- 3.10 e7 / e7D Parts supplied
- 3.11 c Series and e Series parts supplied
- 3.12 Tools required for installation
- 3.13 Selecting a location
- Chapter 4 Cables and connections
- 4.1 General cabling guidance
- 4.2 Connections overview
- 4.3 a9x and a12x connections overview
- 4.4 3–pin power connection
- 4.5 Power and data (combined) connection
- 4.6 SeaTalkng® connections
- 4.7 NMEA 2000 connection
- 4.8 SeaTalk connection
- 4.9 NMEA 0183 connection — Power/NMEA/Video cable
- 4.10 a6x and a7x to NMEA 0183 DSC VHF radio connection
- 4.11 Sonar module and transducer connection
- 4.12 Radar network connection
- 4.13 GA150 connection
- 4.14 GNSS / GPS connection
- 4.15 AIS connection
- 4.16 Fastheading connection
- 4.17 Keypad network connection
- 4.18 Weather receiver connection
- 4.19 Video connection — composite
- 4.20 Video in-out connection
- 4.21 IP Camera connection
- 4.22 Thermal camera connection
- 4.23 Fusion network connection
- 4.24 Fusion NMEA 2000 connection
- 4.25 Media player connection
- 4.26 Raymarine mobile app connection
- 4.27 Bluetooth remote control connection
- Chapter 5 Mounting
- Chapter 6 Maintaining your display
- Chapter 7 Troubleshooting
- 7.1 Troubleshooting
- 7.2 Power up troubleshooting
- 7.3 Radar troubleshooting
- 7.4 GPS troubleshooting
- 7.5 Sonar troubleshooting
- 7.6 Sonar crosstalk interference
- 7.7 Thermal camera troubleshooting
- 7.8 System data troubleshooting
- 7.9 Video troubleshooting
- 7.10 Wi-Fi troubleshooting
- 7.11 Bluetooth troubleshooting
- 7.12 Touchscreen troubleshooting
- 7.13 Touchscreen alignment
- 7.14 Miscellaneous troubleshooting
- Chapter 8 Technical specification
- Chapter 9 Technical support
- Chapter 10 Spares and accessories
7.2Poweruptroubleshooting
Problemsatpowerupandtheirpossiblecausesandsolutionsaredescribedhere.
Productdoesnotturnonorkeepsturningoff
PossiblecausesPossiblesolutions
Blownfuse/trippedbreaker1.Checkconditionofrelevantfusesandbreakersandconnections,replace
ifnecessary(RefertotheT echnicalSpecicationsectionofyourproduct’s
installationinstructionsforfuseratings.)
2.Iffusekeepsblowingcheckforcabledamage,brokenconnectorpinsor
incorrectwiring.
Poor/damaged/insecurepowersupply
cable/connections
1.Checkthatthepowercableconnectorisfullyinsertedintotheunitandlockedin
position.
2.Checkthepowersupplycableandconnectorsforsignsofdamageorcorrosion,
replaceifnecessary.
3.Withtheunitturnedon,tryexingthepowercableneartothedisplayconnector
toseeifthiscausestheunittore-boot/loosepower,replaceifnecessary.
4.Checkthevessel’sbatteryvoltage,theconditionofthebatteryterminalsand
powersupplycables,ensuringconnectionsaresecure,cleanandfreefrom
corrosion,replaceifnecessary.
5.Withtheproductunderload,usingamulti-meter,checkforhighvoltagedrop
acrossallconnectors/fusesetc,replaceifnecessary.
IncorrectpowerconnectionThepowersupplymaybewiredincorrectly,ensuretheinstallationinstructionshave
beenfollowed.
Powersourceinsufcient
Withtheproductunderload,usingamulti-meter,checkthepowersupplyvoltageas
closetotheunitaspossibletoestablishactualvoltagewhenthecurrentisowing.
(RefertotheTechnicalSpecicationsectionofyourproduct’sinstallationinstructions
forpowersupplyrequirements.)
Productwillnotbootup(re-bootloop)
PossiblecausesPossiblesolutions
Powersupplyandconnection
Seepossiblesolutionsfrom‘Productsdoesnotturnonorkeepsturningoff’above.
Softwarecorruption1.Intheunlikelyeventthattheproductssoftwarehasbecomecorruptedplease
tryre-ashingthelatestsoftwarefromtheRaymarinewebsite.
2.Ondisplayproducts,asalastresort,youcantrytoperforma‘PoweronReset’,
howeverthiswilldeleteallsettings/presetsanduserdata(suchaswaypoints
andtracks)andreverttheunitbacktofactorydefaults.
PerformingaPoweronReset
Performinga‘PoweronReset’willdeleteall
settings/presetsanduserdata(suchaswaypoints
andtracks)andreverttheunitbacktofactory
defaults.
1.Powertheunitoff.
2.Powertheunitbackon.
3.WhentheLightHouselogoappearsPressand
holdthePowerbutton.
TheRaymarineInitializationscreenisdisplayed.
4.Touchonlydisplays:
i.PressthePowerbuttonagaintoselect‘1–
Resettofactorydefaults’.
A7secondcountdownwillbegin.Whenthe
countdownreacheszerotheunitwillbereset
tofactorydefaultsettings.
ii.Youcanstoptheresetprocessbypressing
thePowerbuttonagainbeforethecountdown
timerreacheszero.
Thiswillselectthesecondoption:‘2–Exit
andstarttheapplication’andbeginanew
countdowntimer.
5.Non-TouchandHybridTouchdisplays:
i.PresstheWPT/MOBbutton.
Theunitwillberesettofactorydefault
settings.
Troubleshooting
69