Operation Manual

Chapter 3: Waypoints 35
2. Press the REVIEW AND EDIT WAYPOINTS softkey
3. Use the trackpad to select the waypoint to be edited.
4. Press the VIEW AND EDIT DETAILS softkey.
5. Make any changes you require.
6. Press OK to save your changes.
7. Press CANCEL to return to normal operation.
Sorting the waypoint list
You can sort the waypoint list to make it easier to manage. This is
particularly useful if you have a large number of waypoints.
To sort the waypoint list:
1. Press the WPTS/MOB button.
2. Press the REVIEW AND EDIT WAYPOINTS softkey
3. Press the SORT LIST softkey.
4. Press the SELECT SORT OPTION softkey.
5. Select a sort method from the list.
6. Press OK. The waypoint list is sorted into the selected option.
Moving waypoints
You can move the position of any waypoint, except an active one.
There are two methods of moving a waypoint, either by dragging it
into a new position using the cursor, or, changing its co-ordinates
within the waypoint list.
To move a waypoint using the cursor:
1. Use the trackpad to place the cursor over the waypoint to be
moved.
2. Press the MOVE WAYPOINT softkey.
3. Use the trackpad to move the cursor and waypoint to the
required position.
4. Press the PLACE WAYPOINT softkey.
To move a waypoint using the waypoint list:
1. Press the WPTS/MOB button.
2. Press the REVIEW AND EDIT WAYPOINTS softkey.
3. Edit the coordinates as required.
4. Press OK to save the new details.
CAUTION: Moving waypoints
If you move a waypoint that is used in a route, the new
position will be updated within the route. Make sure that this
does not present a navigation hazard.