Operation Manual

Chapter 3: Waypoints 37
3. Press SELECT GROUP A and select the group to move the
waypoint from.
4. Press SELECT GROUP B and select the group to move the
waypoint to.
5. Highlight the waypoint you want to move.
6. Press MOVE WAYPOINT FROM A TO B.
7. Press OK when done.
To rename a group
1. Open the waypoint group list.
2. Highlight the group you want to rename.
3. Press the RENAME GROUP softkey.
4. Press the EDIT GROUP NAME softkey.
5. Enter the new name.
6. Press OK.
Deleting waypoint groups
When you delete a waypoint group, the group name and all the
associated waypoints are erased from the system.
If a group contains one or more waypoints that you want to keep,
move these waypoints out of the group as detailed on page 36,
before deleting the waypoint group.
You can erase any waypoint group, except the following:
• the ‘My Waypoints’ group.
• a group containing an active waypoint.
• a group that contains waypoints that are part of a stored route.
To erase a waypoint group:
1. Open the waypoint group list.
2. Select the group you want to erase.
3. Press the ERASE GROUP softkey.
4. Press OK to confirm the deletion.