Operation Manual

44 A-Series display - User reference manual
3. Press USE WAYPOINT LIST.
4. From the waypoint list, select the first waypoint to be used in the
route.
5. Continue to select waypoints until your route is complete.
Making changes to the route being built
If you make an error whilst building a route you can:
• Undo the last waypoint in an on-screen route build.
• Delete a waypoint from the new route list in a waypoint list route
build.
• Abandon the route build.
To undo the last waypoint in an on-screen build:
1. Press the UNDO WAYPOINT softkey.
The waypoint and its associated dotted line is removed from the
chart and the cursor moves back to the previous waypoint. Pressing
the UNDO WAYPOINT softkey repeatedly will remove successive
waypoints from a route.
To delete a waypoint from the new route list:
1. Use the trackpad to highlight the waypoint to be removed from
the route list.
2. Press the REMOVE WAYPOINT softkey.
The remaining waypoints will renumber accordingly.
To abandon the route build:
1. Press the CANCEL button.
Saving a route
Once a route has been built, you have the option to either:
• Save and immediately follow the new route, or,
• Save the new route for later use
A route that is saved and immediately followed is called the ‘Quick
Route’. If a quick route already exists, saving the new route will
overwrite the existing quick route.
To follow the Quick Route:
1. Press the FOLLOW (QUICK ROUTE) softkey.
To Save a route (for later use):
2. Press the SAVE ROUTE softkey. The Save Route Dialog box
appears.
3. Press the EDIT NAME softkey and enter the new route name.
4. Press the EDIT COLOR softkey and enter the new route color.
5. Press OK to accept the changes.