Operation Manual

Chapter 4: The chart application 47
To change the name and color of a route;
1. Press the ROUTES softkey.
2. Press the REVIEW AND EDIT ROUTES softkey. The routes list
appears.
3. Press the EDIT NAME AND COLOR softkey.
4. Press the EDIT NAME softkey and enter the new route name.
5. Press the EDIT COLOR softkey and enter the new route color.
6. Press OK to accept the changes.
Erasing a route
Any route stored in the route list can be erased, with the exception
of the one that you are following.
Erasing a route will only delete the waypoints used by that specific
route. Waypoints used within other routes are not affected.
To erase a route:
1. Press the ROUTES softkey.
2. Press the REVIEW AND EDIT ROUTES softkey. The routes list
appears.
3. Use the trackpad to highlight the route to be erased.
4. Press the ERASE ROUTE softkey.
Timed routes
Details of all routes are held in the routes list. This list can be used
in conjunction with the time and speed over ground (SOG) options
to show a journey time or estimated time of arrival (ETA) and the
actual or planned SOG.
If a route is active, the data will be updated to show bearing, dis-
tance and time from your boat’s current position.
To view time and SOG data:
5. Either use the trackpad to move the cursor and highlight a route
on-screen, or, highlight a route in the routes list.
6. Press the ROUTE DETAILS softkey.
7. Toggle between TIME and SOG settings to show the relevant
data as required.