Operation Manual

Chapter 5: 3D chart application 67
Active action mode
Provided that your system has a valid fix, this is the default mode
when you first open the 3D chart application. The screen shows an
aerial view of the 3D chart as if you are above your boat, slightly
behind it and looking forward (eye point). As the boat moves forward
the chart automatically updates and reveals the changing view
ahead.
In active motion mode you can adjust the pitch of the view, but rotat-
ing or panning the chart will change into planning mode.
Changing the view
There are four view options to choose from: forward, aft, port and
starboard.
The current option is highlighted on the toolbar and displayed in the
status bar.
AFTPRT
PRT ROTATE 106
o
T2.431nm
Eye point above and to starboard side
of boat, looking to port.
STB ROTATE 280
o
T2.431nm
AFT
D8726_1
STB
Eye point above and to port side of
boat, looking to starboard.
Port
Starboard
FWD ROTATE 195
o
T2.431nm
FWD
Default view.
Eye point above and behind the boat,
looking forward.
Pressing FIND SHIP resets to this view.
AFT ROTATE 011
o
T
Eye point above and in front of the boat,
looking behind it.
D8725_1
AFT
2.431nm
Forward
Aft