Operation Manual

84 A-Series display - User reference manual

6.7 Placing waypoints

You can pause the scrolling image to place a waypoint at a position

or target that you want to return to at a later date. When a waypoint

is placed, its details are added to the Waypoint List and a vertical

line labelled WPT is placed on screen. You can edit waypoints and

navigate to them in an active fishfinder window.

To place a waypoint in Fishfinder mode

1. Press the WPTS button

2. Select the appropriate option:

• WAYPOINT AT CURSOR

• WAYPOINT AT VESSEL

• WAYPOINT AT LAT/LON

For further information on waypoints operation refer to Waypoints on

page 30:

6.8 Fishfinder alarms

There are a number of alarm messages associated with the fish-

finder application.

• Fish Alarms - sound when a target meets the specified sensitiv-

ity level and, is within the depth limits (if enabled). The greater

the fish alarm sensitivity, the greater the number of target image

depths displayed.

• Shallow/Deep Alarms - sound when the DSM detects that the

depth is less than the shallow limit, or greater than the deep

limit.

You can switch the alarms on, set the limits and specify the fish

alarm sensitivity.