Installation Instructions

38 A-Series display - Installation instructions
5.1 Initial power on test
Turn on the display
To Power ON:
Press and hold the POWER key until the screen shows
the Raymarine logo.
Select a page set
When you first turn the display on you will be prompted to select a
page set from those available.
Note: You can change the required page set at any time. Refer to
the user reference manual for details.
Select a page set at first time Power on:
1. Use the trackpad Up/Down keys to select the first Page Set in
the list.
2. Press OK.
5.2 External GPS setting
When using an external GPS antenna you must disable the internal
GPS. Failure to do this will result in no GPS fix being available.
To disable the internal GPS:
1. Press and hold the PAGE/MENU key to open the setup menu.
2. Use the trackpad up / down to select the Internal GPS option.
3. Use the trackpad right to open the sub-menu.
4. Use the trackpad to select OFF
5. Press OK to accept and save the change.
6. Press OK again to return back through the menus to the normal
display.
Highlight appropriate
pre-configured page set