Installation Instructions

8 A-Series display - Installation instructions
Suppression ferrites
Raymarine cables may be fitted with suppression ferrites. These are
important for correct EMC performance. Any ferrite removed to facil-
itate installation must be replaced in the original position
immediately installation is complete.
Use only ferrites of the correct type, supplied by Raymarine autho-
rized dealers.
Connections to other equipment
If Raymarine equipment is to be connected to other equipment
using a cable not supplied by Raymarine, a suppression ferrite must
always be attached to the cable that is closest to the Raymarine
unit.
Declaration of conformity
Raymarine Ltd. declare that the A-Series Multifunction Displays are
in compliance with the essential requirements of EMC directive
2004/108/EC.
The original Declaration of Conformity certificate may be viewed on
the relevant product page at www.raymarine.com
Product disposal
The Waste Electrical and Electronic Equipment (WEEE)
Directive requires the recycling of waste electrical and elec-
tronic equipment. Whilst the WEEE Directive does not apply
to some Raymarine products, we support its policy and ask
you to be aware of how to dispose of this product.
The crossed out wheeled bin symbol, illustrated above, and found
on our products, signifies that this product should not be disposed of
in general waste or landfill.
Please contact your local dealer, national distributor or Raymarine
Technical Services for information on product disposal.
Warranty
To register your Raymarine A-Series Multifunction Display owner-
ship, please take a few minutes to fill out the warranty registration
card found in the box, or visit www.raymarine.com
and register on-
line.
It is important that you register your product to receive full warranty
benefits. Your unit package includes a barcode label indicating the
serial number of the unit. You should stick this label to the warranty
registration card.
About this manual
This handbook contains important information on the installation,
operation and maintenance of your A-Series Multifunction display.
The equipment described within is intended for use on leisure
marine boats and workboats not covered by International Maritime
Organization (IMO) and Safety of Life at Sea (SOLAS) Carriage
Regulations.