Installation Instructions

2.Placethesmallsealingringinthegroovelocated
onthebottomoftheMountingtray.
3.Securethetraytothebracketusing3ofthe
suppliedscrews,inthepositionsindicatedinthe
illustrationabove.
4.Placethelargesealingringintothegrooveon
theuppersideoftheMountingtray.
5.PulltheSeaT alkng®cablethroughthecanterof
thebracketandtray.Pluginthecableconnector
ontheundersideoftheunitandsecureby
rotatingthelockingcollarclockwise2clicks.
6.Inserttheunitintothemountingtray,ensuring
thetabsintheMountingtrayareslottedintothe
groovesaroundtheedgeoftheunit.
Important:
TheunitmustbemountedwiththeLED‘arrow’
inparallelalignmentwiththelongitudinalaxis
(centerline)ofthevesselandbepointingtowards
thevessel’sbow.
7.OrientatetheMountingtrimsothattherelease
holeisaccessiblewhenmounted.
8.PlacetheMountingtrimovertheunitslightly
offset,andthentwisttheMountingtrimclockwise
untilitlocksintoposition.
Releasingtheunitfromtheadaptor
Followthestepsbelowtoreleasetheunitfromthe
Mountingadaptor.
1.Inserttheatofasmallatbladescrewdriver,
orsimilartoolintothereleaseholelocatedon
theatedgeofthemountingadaptorandtwist
thescrewdriver90°,sothatthereisasmallgap
betweentheMountingtrimandMountingtray.
Important:Tohelppreventscratchingtheproduct,
coverthetipofyourscrewdriverwithasmallpiece
ofinsulationtape.
2.TwisttheMountingtrimcounter-clockwise
approximately10°andthenliftawayfromthe
unit.
Installation45