Installation guide

7
Important information
Introduction
Your Raymarine DSM400 is a 'black box'
digital sounder module that provides full
function fishfinding and sonar capabilities
to Raymarine E-Series and G-Series
systems.
Intended use
The intended use for your Raymarine DSM400 Digital Sounder
Module is for leisure marine boats and workboats not covered by
International Maritime Organisation (IMO) and Safety of Life at
Sea (SOLAS) Carriage Regulations.
EMC conformance
All Raymarine equipment and accessories are designed to the
best industry standards for use in the leisure marine market.
The design and manufacture of Raymarine equipment and
accessories conform to the appropriate Electromagnetic
Compatibility (EMC) standards, but correct installation is
required to ensure that performance is not compromised.
Declaration of conformity
Raymarine plc declare that the DSM400 Digital Sounder Module
is in compliance with the essential requirements of EMC
Directive 2004/108/EC.
The original Declaration of Conformity certificate may be viewed
on the relevant product page at www.raymarine.com
WEEE Directive
The Waste Electrical and Electronic Equipment (WEEE)
Directive requires the recycling of waste electrical and
electronic equipment. Whilst the WEEE Directive does
not apply to some Raymarine products, we support its
policy and ask you to be aware of how to dispose of this
product.
The crossed out wheelie bin symbol, illustrated above, and
found on our products, signifies that this product should not be
disposed of in general waste or landfill.
Please contact your local dealer, national distributor or
Raymarine Technical Services for information on product
disposal.
RoHS Directive
This product uses components that comply with the
Restriction of the use of certain Hazardous
Substances (RoHS) Directive 2002/95/EC.
D10967-1
RoHS
COMPLIANT
DSM400 Installation Guide.book Page 7 Tuesday, November 4, 2008 4:53 PM