Specifications

195mm
274mm
184mm
60mm
256mm
==
540mm (T2) 690mm (T3)
101mm
180mm (T2) 267mm (T3)
911mm 1115mm 354 – 568mm
62mm
103mm
220mm
240mm
460mm mid-stroke
103mm
63mm
AUTOPILOTS 83
Mechanical linear drives
Our most commonly used drive types for sailing vessels. Raymarine
mechanical linear drives provide powerful thrust, fast hard-over
times and quiet operation. Mounted below decks, the linear drive
moves the rudder directly by pushing the tiller arm or a rudder
quadrant.
Mechanical rotary drives
The rotary drive is designed for power and sailboat systems that
can be driven from the helm position through a chain and sprocket
(e.g. cable and rod steering systems). The outstanding design of the
Raymarine rotary drive unit provides smooth, powerful autopilot
controlled steering with quiet operation. Use the table below to
select a rotary drive suitable for your vessel displacement.
MECHANICAL ROTARY DRIVES
DRIVE TYPE TYPE 1 TYPE 2
Maximum boat displacement 11,000 kg 20,000 kg
Peak output torque 20 nm 34 nm
Maximum shaft speed 33 rpm 33 rpm
Recommended hard-over times (no load) 10 seconds 10 seconds
Power consumption 24–48 W 60–84 W
Corepack used SPX-10 SPX-30
` Optional drive sprockets and modification to the steering chain may be required.
` An authorised Raymarine dealer is best suited for installing a linear drive system.
` A linear drive unit connects to the rudder stock via an independent tiller arm. Accessory fittings from your steering system manufacturer
may be required.
` An authorised Raymarine dealer is best suited for installing a linear drive system.
` Must be able to back-drive steering system from the rudder.
MECHANICAL LINEAR DRIVES
DRIVE TYPE TYPE 1 TYPE 2 SHORT TYPE 2 LONG
Maximum boat displacement 11,000 kg (24,000 lb) 15,000 kg (33,000 lb) 20,000 kg (44,000 lb)
Peak thrust 295 kg (650 lb) 480 kg (1,050 lb) 480 kg (1,050 lb)
Maximum stroke 300 mm (12") 300 mm (12") 400 mm (16")
Hard over to hard over times (+/- 35°, no load) 11 seconds 11 seconds 14 seconds
Maximum rudder torque 735 nm (6,500 lb.in) 1,190 nm (10,500 lb.in) 1,660 nm (14,700 lb.in)
Power consumption 18–36 W 48–72 W 48–72 W
Corepack used SPX-10 SPX-30 SPX-30
MECHANICAL DRIVE UNITS
ORDERING INFORMATION
M81135 Type 1 12V Rotary Drive
M81136 Type 2 12V Rotary Drive
M81137 Type 2 24V Rotary Drive
M81138 Standard Sterndrive
E12026 Universal Sterndrive
M81130 Type 1 Linear Drive 12V
M81131 Type 2S (Short) 12V
M81132 Type 2L Linear Drive (Long) 12V
M81133 Type 2S Linear Drive (Short) 24V
M81134 Type 2L Linear Drive (Long) 24V
M81200 Type 2 Hydraulic Linear (12V)
M81201 Type 2 Hydraulic Linear (24V)
M81202 Type 3 Hydraulic Linear (12V)
M81203 Type 3 Hydraulic Linear (24V)
Rotary Drive
Hydraulic Linear Drive
Standard Sterndrive
Universal Sterndrive