Operation Manual

6.1Displaypower
Poweringthedisplayon
1.PressandholdthePOWERbuttonuntiltheRaymarinelogo
appears.
2.PressOKtoacknowledgethedisclaimermessage.
Poweringthedisplayoff
1.PressandholdthePOWERbuttonuntilthecountdownreaches
zero.
Note:IfthePOWERbuttonisreleasedbeforethecountdown
reacheszero,thepoweroffiscancelled.
Standby(PowerSave)mode
InPowerSavemodeallfunctionsofthemultifunctiondisplayremain
active,buttheunitisplacedintoalowpowerstate.TheLEDlights
aroundtheRotarycontrollerwillblinkonceevery1.5secondsto
indicatethattheunitisinPowerSavemode.PowerSavemodeis
cancelledbypressingaphysicalbuttonorwhenanalarmevent
occurs.
D12 3 6 7-1
Note:ToensureusersafetythePowerSavefeaturewillnotbe
availableifanyconnectedradarsareswitchedon.
EnablingPowerSavemode
ToenablePowerSavemodefollowthestepsbelow.
1.Ensureanyradarsconnectedtothesystemareswitchedoff.
2.PressthePOWERbutton.
Theshortcutsmenuisdisplayed.
3.SelectPowerSaveMode.
ThemultifunctiondisplaysisnowinPowerSavemode.
4.YoucanwaketheunitfromPowerSavemodeatanytimeby
pressingaphysicalbuttononthemultifunctiondisplay.
Note:PowerSavemodeisautomaticallycancelledifanalarm
eventoccurs.
6.2e7/e7DControls
D12 1 7 9-1
2
4
5
6
7
3
1
1.Touchscreen—youcantouchthescreentooperatemany
commonfunctions,includingallmenuoperations(HybridT ouch
multifunctiondisplaysonly).
2.Menu—accessesmenus.Pressagaintoclosemenus.
3.UniControl—providesajoystickandrotarycontrolandanOK
buttonforusingmenusandapplications.
4.Back—presstoreturntoapreviousmenuordialoglevel.
5.WPT/MOB—pressandreleasetoaccessthewaypoint
options.Pressagaintoplaceawaypoint.Pressandholdto
placeaManOverboard(MOB)markeratyourcurrentposition.
6.Power—pressoncetoswitchtheunitON.Oncepoweredon,
pressthePowerbuttonagaintoadjustthebrightness,access
thepowercontrolsforexternaldevices,andaccesstheautopilot
controls.PressandholdtoswitchtheunitOFF.
7.Chartcardslots—openthecarddoortoinsertorremove
MicroSDcards.Thereare2cardslots(labelled1and2),used
forelectronicchartsandarchivingwaypoint,routeandtrack
data.
56NewcSeries/NeweSeries