Manualshelf

Operation Manual

ManualsBrandsRaymarine ManualsAudioRay 53 VHF Radio with DSC
21222324252627282930
5’
Press and release WX/INT key if you do not have to check the MMSI number again ,
6’
the LCD displays “DSC”, “ --- ---“,(Large Channel Display) and “w”(Small Channel
Display) which means the unit is ready and waiting for input of Calling CH .
8.
(If you would like to enter the different Other Ship’s MMSI number manually),
1. To rotate channel selection knob from the stage of the above 4(“MEM”,”DSC”,”0” and
“1”) ,then the different other ship’s MMSI number can be set. The LCD displays “DSC” ,
“3”(Large Channel display) and “1” (Small Channel display) which means that the number of
1
st
digit is 3.
2. To press and release DSC key for confirmation,Alerm 1 is heard and the MMSI number of 2
nd
digit will be ready to be input. “MEM”, “DSC”,”0”(Large Channel Display) and “2”(Small
Channel display) are displayed on the LCD. To rotate Channel Selection Knob,the MMSI
number of 2
nd
digit is selected.
3. The rest of the digits are entered in the same manner.
4. Once all of the digits have been entered,the unit re-display MMSI Number every 1 sec from
1
st
digit to 9
th
digit. When the operator confirmed MMSI number, “DSC”
“--- ---“ and “w” are displayed on the LCD by pressing and holding DSC key for 2
seconds.
If the operator would like to double check the MMSI number again or to change the MMSI
number, the LCD displays “MEM”,”DSC”,”0” and “1” by pressing and releasing DSC key.
4) Receiving Individual Ship’s Call Response
1. The receivable Channel is only 70CH. It can be done even in working CH, Monitor
mode and Scan mode.
2. When the unit receive the signal, the unit will become automatically “DSC” mode.
If the received signal is for the unit itself,the unit will respond the signal.
If the received signal is not for the unit itself, the unit will not respond and Monitor
Mode or Scan mode will continue to be in use.
3. The operation when the received signal is for the unit itself.
When the unit receives “Individual Ship’s Call” at 70CH, Alarm tone will sound.
----
Æ
“DSC” is displayed which means the unit is in DSC mode.