Operation Manual

----
Æ
“As” is flashing at Channel Display(Small) which means the unit is ready to
receive All Ship’s Call.
2. After the unit received “All Ship’s Call”, when SCAN/MEM key(“DSC” key) is
pressed, the audible beep sound 1 is heard and the unit will switch to the 16CH of
Working CH and then “DSC” mode will be exited.
----
Æ
When “DSC” mode is exited, “DSC” is eliminated from the LCD.
----
Æ
Channel display(Large) displays 16CH of Working CH.
----
Æ
Channel Display(Small) is eliminated.
6) “ Distress Call”
The “Distress Call” is to be initiated by pressing and holding the “DISTRESS” key
on the rear of the microphone for 4 seconds.The Distress call has highest priority of
all the operations.
Unless Own Ship’s MMSI ID is entered, Distress Call is not available.
1. When Distress key is continuously pressed, “Distress Call” can start to operate.
----
Æ
“DSC” is displayed which means the unit is in DSC mode.
----
Æ
Channel Display(Large) displays Counts down time(4,3,2,1).
Counts down will be shown every 1 second on Channel Display(Large)
----
Æ
“d” is displayed at Channel Display(Small)
2. “Distress” key has to be pressed continuously for over 4 seconds.
While Distress key is being pressed, Channel Display(Large) is showing Count
down times like 4
Æ
3
Æ
2
Æ
1.
If “Distress” key is released on the way before 4 seconds, “Distress Call”
operation will be cancelled.
3. After Count down is finished,”Distress Call” can start to be transmitted.
----
Æ
Channel Display(Large) displays 70CH.
----
Æ
“d ” is displayed at Channel Display(Small) which means the unit is in
Distress Call mode.