Operation Manual

-. To begin All Scan while memory are being stored in,All Scan can be begun by
pressing once more during flashing on the LCD.
-. When SCAN/MEM key is continuing to be pressed for more than three
seconds, Alarm 1 is heard and Memory of the current channel can be
stored/canceled.(When the current channel is stored,the current channel will be
canceled. When no other channel is stored, the current channel will be stored.
5) WX/INT key
-. When WX/INT key is pressed and released, Alarm 1 is heard and Working CH
/Weather CH are toggled each other.
-. When WX/INT key is continued to be pressed for more than 2 seconds, Alarm 1 is
heard and frequency selection mode(US,International or Canadian) can be
changed. There are 3 types of frequencies selection modes,US,International and
Canadian. The frequencies selection mode is changed like USA--
Æ
CAN--
Æ
INT.
-. While the monitor operation is in use,Dual monitor and Triple monitor can be
changed.
6) MON/ 1/25 Key
-.When MON/ 1/25 is pressed and released, Alarm 1 is heard and Monitor operation
start.(Dual Monitor)
-. When MON/ 1/25 continues to be pressed for more than 2 seconds, Alarm 1 is
heard and Transmitter power can be changed. When transmitter power is 25W, it
can be 1 W. When transmitter power is 1 W, it can be 25 W.
7) 16/9 Key
-. When 16/9 key is pressed and released, Alarm 1 is heard and Channel can be
changed as follows.
The current channel is Working CH---------------
Æ
Becomes Priority CH
The current channel is Weather CH---------------
Æ
Becomes Priority CH
The current channel is Priority CH ---------------
Æ
Becomes Working CH
-. When 16/9 key continues to be pressed for more than 2 seconds, Alerm 1 is heard and
priority CH can be toggled. When the private channnel is 16CH,it can be changed to
9CH and when the private channel is 9CH,it can be changed to 16CH.