Operation Manual

Chapter 4: Operating the Radio 27
4.16 USER Channel Mode
Press and hold the HI/LO / USER key while in normal operation mode to
enter User Mode. The USER and SAVED indicators appear.
USER Channel Mode displays only the channels that you have saved to
memory, which enables you to easily use your favourite channels while
bypassing unwanted or seldom-used channels during a scan.
Note: The procedure for saving a channel to memory is outlined in Section
4.14, Adding Channels to Memory.
While in User Mode:
• Press and release the SCAN/SAVE key to start Memory Scan mode.
• Press and release the Channel UP or Channel DOWN key to scroll
through the saved channels.
• Press and hold the SCAN/SAVE key to delete the current channel from
memory list.
• Press 16/PLUS to terminate User mode and switch to the Priority Chan-
nel.
Note: You cannot switch Channel sets while in User Mode. The
*
key does
not function and sounds an error beep if pressed.
Press and hold the HI/LO / USER key for 3 seconds to quit User mode and
return to the last-used working channel.