Operation Manual

Chapter 4: Operating the Radio 31
In our example, the sequence would be:
1 2
2 4
3 4
4 0
5 3
6 8
7 0
8 7
9 5
When complete, the radio returns to the last-used mode. If no channel is
found in the memory, the radio reverts to CH 16 at High Power setting.
If a different ATIS ID is entered the second time, the operation is can-
celled and a long alarm tone is sounded.
8. Store the ATIS ID permanently into the radio by turning the radio OFF.
To exit ATIS programming mode without saving, press the 16/PLUS key at
any time to jump to priority Channel 16.
Note: After this programming, only your distributor can modify or erase the
ATIS ID.