Operation Manual

14 Ray218E and Ray55E Marine VHF Radios
Dedicated key for switching to Priority Channel 16
Programmable Secondary Priority (PLUS) Channel key
ATIS operation, if required
Private Channels (if so licensed)
All Scan, Memory Scan and 2 Priority Scan functions
Dual/Tri Watch Monitor modes
Enhanced GPS Position Data gives Latitude and Longitude to 1/10,000 of a
minute plus Time, SOG and COG data from any NMEA input
Automatically distinguishes between calls made to Ship or Coast Stations
Low and High Voltage detection with alert
Editable Channel Name
10 Brightness and Contrast settings
Optional Raymic Second Station Handset
Optional external speakers for both transceiver and Raymic stations
Digital Selective Calling (DSC)
The Ray218E and Ray55E include equipment for Class “D” Digital Selective
Calling (DSC). DSC protocol is a globally applied system used to send and receive
digital calls. DSC uses a unique Maritime Mobile Service Identity (MMSI) number
to direct DSC calls directly to your radio, much like a telephone number. Most
importantly, DSC enables digital distress calls that automatically notify other
ships and shore stations where you are and that you are in a distress situation.
Note:
An MMSI ID number is required to operate the DSC equipment in this radio. You
can request an MMSI number from the same agency that issues radio or Ship Radio licenc-
es in your area. Once obtained, you can program the MMSI number yourself one time only
using the menu operation described in “My MMSI ID“ on page 96.
The Ray218E and Ray55E include the following DSC features:
Separate receiver dedicated to handling DSC Calls on channel 70
Position Request function sends GPS position data to or receives position data
from other stations
Phonebook for automatically making DSC calls
Quick Call feature sends Individual Calls or Group Calls directly from the
phonebook, just like the redial function on a telephone
Five Group IDs for making DSC Calls only to stations in your group, such as a
flotilla or fishing fleet
DSC functions are fully described in Chapter 5.