Operation Manual

15
Chapter 2: Installation
2.1 Unpacking and Inspection
Use care when unpacking the unit from the shipping carton to prevent damage to
the contents. It is also good practice to save the carton and the interior packing
material in the event you must return the unit to the factory.
Removing the Sun Cover
The Sun Cover was designed to remain attached to the radio, even in rough seas.
To remove the Sun Cover:
1. Place your thumb in the dimple and push downward.
2. At the same time, pull up the lift tab with your index finger.
3. Pinch your fingers towards each other as you lift up.
D10233-1