Operation Manual

Chapter 4: Menu Settings 49
Some channels are limited by regulation to be low power only. If the HILO
operation request is denied, an error tone beeps.
Channels restricted to low transmit power are as follows:
• Canadian channel set: 13, 15, 17, 77
• International channel set: 15, 17, 75, 76
• US channel set: 13, 17, 67, 77
Saving Channels to Memory
The Ray218E/Ray55E can store any channel (including Private Channels) into
memory. The stored channels are the ones scanned in the Saved (Memory) Scan
mode (see page 46). Any number of channels can be saved as memory channels.
Separate memory channel groups exist for USA, International, and Canadian
frequency sets.
To add or remove a channel to/from memory:
1. Select SAVE CHANNEL from the VHF OPS menu.
2. Rotate the
CH/OK knob to select the channel to be added/removed from
memory.
3. To add the selected channel from memory, press SAVE. The SAVED icon
appears to indicate the current channel has been saved in memory.
To remove the channel from memory, press CLEAR. The SAVED icon disappears.
73
SHIP/SHIP
SELECT
I
N
T
A
VHF OPS
SCAN MODE
DISPLAY MODE
HI/LO POWER
SAVE CHANNEL
WATCH MODE
73
SHIP/SHIP
BACK
I
N
T
A
SAVE CHANNEL
SELECT CH
PRESS SAVE
OR CLEAR
WATCH MODE
SAVE
CLEAR
08
SHIP/SHIP
B
A
BACK
I
N
T
SAVE CHANNEL
SELECT CH
PRESS SAVE
OR CLEAR
WATCH MODE
SAVE
CLEAR
08
SHIP/SHIP
B
A
BACK
I
N
T
SAVE CHANNEL
SELECT CH
PRESS SAVE
OR CLEAR
WATCH MODE
SAVE
CLEAR
D9372-1
Select Channel