Operation Manual

Chapter 4: Menu Settings 59
To manually set the GPS position and time settings:
1. Under the GPS SETUP menu, select MANUAL POS. The Manual Position
screen appears.
2. Using the
CH/OK knob, fill in the Lat/Lon and time information, one character
at a time. The first character space is highlighted with a flashing underline.
A more-detailed description of manual character entry can be found in “Add-
ing a new Entry“ on page 79.
•Rotate the
CH/OK knob to scroll through the selections.
• When the desired character appears, push in the
CH/OK knob to accept it.
The next character to be filled in sequence is underlined (_).
• Use the < and > soft keys to edit selected characters, if necessary.
• Continue this process until all latitude data been selected.
• When the direction character is underlined, rotate the
CH/OK knob to
toggle between N and S, if necessary.
• Press the
CH/OK knob when the desired direction character is displayed.
The first character in the longitude field is now underlined.
• Use the same process to complete longitude information.
• Use the same process to complete time information.
When time data is entered manually, the MAN indicator appears in front
of the time, which is displayed in UTC.
3. Press DONE soft key when complete. The radio returns to the GPS Setup menu.
4. Select BACK to exit the menu.
B
72
SHIP/SHIP
B
GPS SETUP
SELECT
MANUAL POS
SETTING
NMEA OUTPUT
[BACK]
I
N
T
B
72
SHIP/SHIP
B
MANUAL POS
BACK
I
N
T
_- --:----N
--- --:----W
--:--UTC
Select Characters Press OK
>
<
B
72
SHIP/SHIP
B
MANUAL POS
BACK
I
N
T
27 07:3800N
080 04:8500W
10:30UTC
PRESS DONE
TO ACCEPT
DONE
72
SHIP/SHIP
B
A
I
N
T
A
50 46.1700N
001 17.7100W
MAN10:30UTC
CH06
CH77
CH08
D9380-1
B
72
SHIP/SHIP
B
GPS SETUP
SELECT
MANUAL POS
SETTING
NMEA OUTPUT
[BACK]
I
N
T