Operation Manual

68 Ray218E and Ray55E Marine VHF Radios
Speed Unit
This parameter sets the unit for Speed that is used to display all data, including
information received from other instruments on the system.
The speed unit
appears on the LCD when COG/SOG is displayed (see page 61).
System Test
This menu item displays status of four separate conditions:
Item Status Meaning
GPS OK Valid NMEA signal received
NO NMEA signal not received
RAYMIC OK Raymic second station is connected
NO Raymic is not connected
HAILER OK Hailer horn speaker is connected
NO Hailer is not connected
BATTERY OK Battery voltage within nominal limits (10.5–15.8 VDC)
NO Battery is below 10.5 VDC or above 15.8VDC
DSC OK DSC processor is operating properly.
NO DSC processor is not operating properly.
72
SHIP/SHIP
A
I
N
T
SELECT
SPEED UNIT
KNOTS
MPH
KPH
[BACK]
72
SHIP/SHIP
B
I
N
T
SYSTM CONFIG
SELECT
A
SPEED UNIT
SYSTEM TEST
VERSION
RESET
[BACK]
72
SHIP/SHIP
A
I
N
T
SELECT
SPEED UNIT
KNOTS
MPH
KPH
[BACK]
D9391-1