Operation Manual

Chapter 5: Digital Selective Calling (DSC) 83
Press PTT to communicate on the specified channel. Pressing PTT at any time
before an ACK is received cancels the Individual Call
Receiving Individual Calls
When an Individual Call is received, an alert tone sounds, the envelope icon
blinks, and the LCD alternates between a screen displaying the name (or MMSI ID)
of the station initiating the call and one indicating that a request for a change of
working channels is being made. The channel does not change until you accept.
The 2 alternating pages of data are recorded in the Call Log. The envelope icon
(
) blinks until you accept the call, reject the call, or open the resulting unread
message stored in the Log. See page “Received Calls (Logs)“ on page 94.
To mute the alert tone:
Press CLEAR. Automatic cancellation takes place after 2 minutes.
To ignore the Individual Call:
Press CLEAR a second time or press the CANCEL soft key. The envelope icon
disappears, the call is interrupted and the normal screen appears on the LCD.
To accept an Individual Call:
1. Press the OK soft key to change channels to the one designated by the caller.
The alert tone is muted and the envelope icon disappears.
2. If the caller requests an acknowledgement, press OK to accept.
09
SHIP/SHIP
B
B
INDIVIDUAL
ROUTINE
SHIP-SHIP
BACK
TO:
$TOTL MADNES
SELECT CH
I
N
T
72
SHIP/SHIP
B
B
I
N
T
BACK
SELECT
OK
Select Working Channel
INDIVIDUAL
ROUTINE
SHIP-SHIP
TO:
$TOTL MADNES
PRESS SEND
70
DSC
B
B
INDIVIDUAL
ROUTINE
SHIP-SHIP
BACK
TO:
$TOTL MADNES
CALLING...
I
N
T
D9403-2
72
SHIP/SHIP
B
B
I
N
T
OK
SELECT OK
ACK RECEIVED
FROM:
$TOTL MADNES
CH HAS BEEN
CHANGED
09
SHIP/SHIP
B
B
INDIVIDUAL
ROUTINE
SHIP-SHIP
CANCEL
TO:
$TOTL MADNES
AWAIT ACK...
I
N
T
SELECT OK
SEND