Operation Manual

3-7
Operations
!
WX indicator
Displayed while in Weather Channel mode. For the RAY230E, this
indicator only appears in the US frequency mode, if this feature has
been activated.
"
TX indicator
Displayed while transmitting.
#
CAN indicator (RAY230 only)
Displayed when the Canadian frequency group is selected.
$
US indicator
Displayed when the US frequency group is selected.
%
DESENS indicator
Displayed during the desensitized receiving (local) mode.
&
INT indicator
Displayed when the International frequency group is selected.
'
1W indicator
Displayed when the transmission power of 1W is selected with the
9/1/25 key or when a low power channel is selected.
 
MULTI indicator (RAY230E only)
Displayed while the channel stored in Multi-Call memory is displayed.
 
MEM indicator
Displayed while the channel stored in memory is displayed. This
indicator flashes before the start of the memory scan operation.

SCAN indicator
Displayed during Scan mode. If channels have been stored in memory,
this indicator will be flashing before the start of Scan mode.
 !
ATIS indicator
Displayed when the ATIS (automatic identification transmission)
feature is turned on (via Menu mode).
 "
DSC indicator
Displayed when in a Digital Selective Calling (DSC) call mode, DSC
log, or the DSC menu.
 #
VOL indicator (in bar graph)
Represents the current sound volume level of the handset. A louder
volume displays a larger number of segments in the bar graph. This
bar graph is not displayed during Menu mode.
RAY230_sect3_1.p65 7/13/2001, 1:42 PM7