Operation Manual

3-61
Operations
3) To enter the nickname, use the numeric keys (0 through 9) to input their
associated alpha or numeric value (refer to section 3.2 Controls and
LCD Display). The currently selected location is indicated by a flashing
"–" character. After inputting the desired letter or numeral, press the
ENT key to submit the entry and proceed to the next place. To go back
by 1 digit, press the CLR key.
If no nickname is to be registered, press the ENT key for all characters
so that they all display a "–".
ENT1-8 0
ENT
ENT 7/PQRS
2/ABC
ENT ENT
ENT
To DELETE mode
Flashing
FlashingFlashing
Flashing FlashingFlashing
If the maximum 20 stations are already
registered, this display is shown and the
radio shifts to Delete mode
Pressing ENT while "N" is displayed
exits Menu mode without registering
the station.
Pressing ENT while "Y" is displayed
registers the station and exits Menu
mode.
ENT
Input remainder
of MMSI number
Input remainder
of MMSI name
Note:
The 0 key will enter only the numeral "0", while the 1 key will alternately
enter "1" and "space". The 0 and 1 keys do not have associated alpha
characters.
RAY230_sect3_4.p65 7/13/2001, 1:43 PM61