Operation Manual
Table Of Contents
- Ray54E Marine VHF Radio
- About this Handbook
- Important Information
- Maritime Mobile Service Identity (MMSI)
- Automatic Transmitter Identification System (ATIS)
- SAFETY NOTICE
- Contents
- About this Handbook iii
- Important Information iv
- Chapter 1: Introduction 1
- Chapter 2: Installation 3
- Chapter 3: Getting Started 9
- Chapter 4: General Operations 17
- 4.1 Turning the Power ON and OFF 17
- 4.2 Setting the Volume 17
- 4.3 Setting the Squelch 17
- 4.4 Setting the Power Output 17
- 4.5 Setting the Channel 18
- 4.6 Selecting a Weather Channel (If Available) 19
- 4.7 Selecting the Priority Channel 20
- 4.8 Selecting the Secondary Priority (PLUS) Channel 21
- 4.9 Transmitting 23
- 4.10 Using the Scan Modes 23
- 4.11 Adding Channels to Memory 26
- 4.12 Using the Monitor Modes 27
- 4.13 USER Channel Mode 29
- 4.14 DSC Call Operation 29
- 4.15 Menu Mode Operation 30
- Chapter 5: Digital Selective Calling (DSC) 31
- Chapter 6: Menu Settings 57
- Chapter 7: Customer Service 85
- Appendix A: Specifications 87
- Appendix B: Channel List 89
- Appendix C: Glossary 101
- Index 103
- Chapter 1: Introduction
- Chapter 2: Installation
- Chapter 3: Getting Started
- 3.1 Keypad and Rotary Knobs
- 3.2 LCD Display
- 1. (HI/LO) TX Power
- 2. (TX) Transmitting
- 3. (RX) Receiving
- 4. (LOCAL) Local/Distant Mode
- 5. DSC Message
- 6. ATIS Active
- 7. NO GPS
- 8. Battery Low
- 9. (USER) Favourite Channel Mode
- 10. (SAVED) Memory Mode
- 11. (WX) Weather Channel
- 12. (ALERT) Weather Alert
- 13. (U I C) Channel Set
- 14. (A) Simplex Channel
- 15. (B) Receive-only Channel
- 16. Channel Number
- 17. Dot Matrix Display
- Chapter 4: General Operations
- 4.1 Turning the Power ON and OFF
- 4.2 Setting the Volume
- 4.3 Setting the Squelch
- 4.4 Setting the Power Output
- 4.5 Setting the Channel
- 4.6 Selecting a Weather Channel (If Available)
- 4.7 Selecting the Priority Channel
- 4.8 Selecting the Secondary Priority (PLUS) Channel
- 4.9 Transmitting
- 4.10 Using the Scan Modes
- 4.11 Adding Channels to Memory
- 4.12 Using the Monitor Modes
- 4.13 USER Channel Mode
- 4.14 DSC Call Operation
- 4.15 Menu Mode Operation
- Chapter 5: Digital Selective Calling (DSC)
- Chapter 6: Menu Settings
- Chapter 7: Customer Service
- Appendix A: Specifications
- Appendix B: Channel List
- Appendix C: Glossary
- Index
104
Installing 7
Position Reply
81
setup
64
Group Calls
38
Receiving
40
Transmitting
38
Group MMSI Setup
73
H
Help from Raymarine 85
HI/LO
indicator 14
key
11
power selection
13, 17
HL/USER key
13
I
Individual Calls 34
Receiving
37
Sent using the Phonebook
34
Installation
3
International channels
89
Invalid Channel
38, 41, 44
K
Key Beep 70
Keypad
9
L
Last Received Position Request 52
Latitude/Longitude Display
67
LCD display
14
M
Memory
Adding channels
26
Menu
12
Menu Mode
57
Backlight adjustment
63
Contrast adjustment
63
DSC Setup
71
GPS/Time Setup
64
Phonebook
59
Adding entries
59
Deleting entries
62
Editing entries
61
Radio Setup
69
Reset 84
Settings
66
MMSI
72
Monitor Mode
27
Dual Watch
27
Tri Watch
28
My ATIS ID
77
My MMSI ID
72
O
Optional equipment 3
P
Phonebook 59
Adding entries
59
Deleting entries
62
Editing entries
61
Position Reply
81
Position Request
50
from Phonebook
50
Receiving from another station
53
Retrieving Last Received
52
Power
11
ON/OFF
17
selection
17
Priority Channel
20
Priority Saved Scan function
25
Priority Scan function
25
PTT key
11, 23
Push-to-Talk key
23
PWR/VOL key
11
R
Radio Setup 69
Channel Name
70
Frequency Band
69
Key Beep
70
Ring Volume
70
Raymarine
Website
85
Reset
84
Ring Volume
70
RX indicator
15
S
Save 13
SAVED indicator
15