User`s guide

11
Installation site
The ACU should be installed below decks, in a position that is:
• Dry.
• Well ventilated.
• Easily accessible.
• Near your main TV viewing area.
The ACU should be installed using the two fixing brackets
supplied. These brackets can be placed on the sides of the unit
to provide a top or bottom fix.
To install the ACU:
1. Select the installation site, ensuring that the proposed site
meets the criteria described above.
2. Using the screws supplied fix the mounting brackets to the
sides of the ACU.
3. Place the ACU in the position where it is going to be installed.
4. Connect the cables to the rear of the ACU.
5. Using a pencil, mark the 4 hole positions (2 each side) for
securing the mounting brackets.
6. Using a suitable drill bit, drill the 4 holes in the required
position.
It is good practice to countersink the mounting holes to avoid
damage to the mounting surface.
7. Using suitable screws, secure the ACU into position.
D10503-1
81304_1.book Page 11 Tuesday, July 31, 2007 2:44 PM