User`s guide

23
Set up mode
To enter set up mode:
Setting the satellite pair
The satellite pair can be changed if you change service
providers. There are two ways in which this function can be
carried out:
• Non DiSEqC method - all users except DirecTV.
• DiSEqC method - DirecTV users.
Non DiSEqC method
To set the satellite pair:
5. Antenna position detail and
signal strength is displayed.
Press center soft key to
display NMEA GPS page.
6. The NMEA GPS information
is displayed.
Press center soft key to
return to antenna status
display.
1. With the antenna tracking.
Press SETUP.
2. Press YES to enter set up
mode.
D7971_2
AZ: ###.# EL:###.#
SIGNAL: ###
D10587_2
126.75E 37.20N *
TRACKING A: ASTRA 2
B: HOTBIRD SETUP
D7972_2
SET UP MODE ?
YES NO
D7973_2
3. Press YES to set the satellite
pair.
1. Follow steps 1 thru 3 for
entering set up mode.
Press YES to set satellite
pair.
SET SAT PAIR ?
PREV YES NEXT
D7974_2
SAT A: ASTRA2
PREV YES NEXT
DXXXX_1
81304_1.book Page 23 Tuesday, July 31, 2007 2:44 PM