User`s guide

25
Note 1: DiSEqC is not used with Dish Network or ExpressVu
satellites. This menu is displayed when the DiSEqC
method - see page 31 - is set to “Use to change Sat”.
2: The optimal setting for DirecTV applications are as
follows: SAT A - DTV101, SAT A* - DTV119, SAT B -
DTV101, SAT B* - DTV110#.
Setting the GPS using the ACU
Note: This function enables you to manually input a GPS
position. This information can be input automatically if
you connect your system to a NMEA 0183 GPS input -
refer to “Connecting the system to a GPS” on page 20.
To set the GPS using the ACU:
4. Set satellite A when DiSEqC
is active from IRD.
Press NEXT or PREV to
show alternative satellite
name.
Press YES to set chosen
satellite to SAT A.
Press BACK to correct input
errors or return to main set
up menu.
5. Set satellite B when DiSEqC
is active from IRD.
Press NEXT or PREV to
show alternative satellite
name.
Press YES to set chosen
satellite to SAT B.
Press BACK to correct input
errors or return to main set
up menu.
6. Press YES to save
selections.
Press NO to cancel and
return to main set up menu.
D8644_3
SAT A*: DTV101
PREV YES NEXT
D8645_3
SAT B*: DTV119
PREV YES NEXT
D7977_2
SAVE ?
YES NO
1. Press YES to enter set up
mode.
2. Press NEXT to enter GPS set
up mode.
3. Press YES to set GPS/
SET UP MODE ?
YES NO
D7973_2
SET SAT PAIR ?
PREV YES NEXT
D7974_2
SET GPS ?
PREV YES NEXT
D7980_2
81304_1.book Page 25 Tuesday, July 31, 2007 2:44 PM