User`s guide

27
2. Press NEXT twice to enter
Edit Sat Info mode.
3. Press YES to enter edit
mode.
4. Set the satellite name.
NEXT or PREV- shows next
satellite name.
SELECT - sets the displayed
satellite for editing.
5. Input satellite name.
+ advances the value.
- decreases the value.
Change the underscored digit
using the +/- buttons.
Press INPUT to move to next
character.
Press BACK to correct input
errors or return to main set up
menu.
SET SAT PAIR ?
PREV YES NEXT
D7974_2
EDIT SAT INFO?
PREV YES NEXT
D7983_2
SATNAME : ASTRA2
PREV SELECT NEXT
D7984_2
SATNAME : ASTRA2
- INPUT +
D7985_2
6. Input satellite position.
+ advances the value.
- decreases the value.
Change the underscored digit
using the +/- buttons.
Press INPUT to move to next
digit.
Press BACK to correct input
errors or return to main set up
menu.
7. Input the tracking frequency
(MHz) and symbol rate (kHz)
for Vertical Low Band.
8. Input the Network ID (NID) for
Vertical Low Band.
9. Input the tracking frequency
(Mhz) and symbol rate (kHz)
for Horizontal Low Band.
D7981_2
LONGITUDE 28.20E
- INPUT +
VER LOW 10788 22000
- INPUT +
D7986_2
-
VER LOW NID 0X0020
- INPUT +
D7987_2
HOR LOW 10773 22000
- INPUT +
D7988_2
81304_1.book Page 27 Tuesday, July 31, 2007 2:44 PM