User`s guide

29
1. Verification method.
SIGNAL - use only signal level for tracking.
DVB LOCK - use only DVB Lock signal for tracking.
DVB DECODE - verify satellite using DVB decode method
for tracking.
DSS LOCK - decode only DSS Lock signal for tracking.
2. Power supplying method.
AUTO - change voltage to LNB by IRD voltage.
ONLY 13 V - always supply 13 V to LNB.
ONLY 18 V - always supply 18 V to LNB.
3. DiSEqC supplying method.
AUTO - change signal to LNB by IRD DiSEqC.
ONLY 0KHZ - always supply 0 kHz to LNB.
ONLY 22KHZ - always supply 22 kHz to LNB.
Setting the local frequency
LNB systems in regions with circular
polarization
18. Press YES to accept the
data.
Press NO to cancel and
return to main set up mode.
D7977_2
SAVE ?
YES NO
1. Press YES to enter set up
mode.
2. Press NEXT 3 times to enter
local frequency mode.
3. Press YES to set local
frequency.
SET UP MODE ?
YES NO
D7973_2
SET SAT PAIR ?
PREV YES NEXT
D7974_4
SET LOCAL FRQ?
PREV YES NEXT
D7996_2
81304_1.book Page 29 Tuesday, July 31, 2007 2:44 PM