User`s guide

39
The GUI control soft keys
The following section describes the operation of the different
GUI soft keys.
Restart
Click this soft key to restart the antenna tracking the chosen
satellite.
Setup
Click this soft key to enter the GUI set up mode before making
any changes.
Get Antenna Information
Click this soft key to display the current system settings.
Advanced control
This is a password protected area for dealer use only.
View Data
Click this soft key to load the factory default settings into the GUI
program.
Update antenna
Click this soft key to send the factory default settings to the
antenna. Remember that this will not restart the system.
Loading default satellite information using
the CD-ROM
The following section enables you to load new satellites into the
ACU using the CD-ROM.
To load new satellites:
1. Insert the CD-ROM into your PC.
2. Select the appropriate folder for your region of operation.
3. Open the GUI for your region.
4. Press ‘Setup’. A dialog box appears, click ‘OK’ to confirm or
‘Cancel’ to exit set up.
D8359_2
D8359_2
81304_1.book Page 39 Tuesday, July 31, 2007 2:44 PM