User`s guide

Antenna diagnosis

1. Press YES to enter set up

mode.

2. Press NEXT 10 times to go to

Antenna Diagnosis menu.

3. Press YES to enter diagnosis

mode.

4. Code being tested is shown.

Press EXIT to return to main

set up menu.

SET UP MODE ?

YES NO

D7973_2

SET SAT PAIR ?

PREV YES NEXT

D7974_2

ANT DIAGNOSIS ?

PREV YES NEXT

D8647_2

CODE 101 TESTING

EXIT

D8648_2

5. Code has been tested and

passed or failed.

Press EXIT to return to main

set up menu.

Code Test

Code 101 Communication between antenna and ACU is being

tested.

If failed, check the RF cable connections

Code 102 AZ CW (clockwise) limit switch is tested.

If failed, check the limit switch, motor and belt for

azimuth axis.

Code 103 AZ CCW (counter clockwise) limit switch is tested.

If failed, check the limit switch, motor and belt for

azimuth axis.

Code 104 EL axis is tested.

If failed, check the limit switch, motor and belt for

elevation axis

Code 105 Sub-reflector is tested.

If failed, check sub-reflector.

Code 106 LNB tested.

If failed, check the LNB and control board.

CODE 101 PASSED

EXIT

D8649_2

81304_1.book Page 45 Tuesday, July 31, 2007 2:44 PM