ST70 Instrument Quick reference guide
Document number: 86139-1 Date: 05/2010
Warning: Read the user manual ST70 handbooks Before using the software read the safety information contained within the user reference manual on the CD-ROM supplied with your product. The following handbooks contain information associated with ST70 products. Warning: Ensure safe navigation This product is intended only as an aid to navigation and must never be used in preference to sound navigational judgment.
Additional handbooks 3 UP / DOWN arrow buttons: Description Part number • Select between available instrument pages. SeaTalkng 81300 • Select options within the setup menus. reference manual LEFT / RIGHT arrow buttons: • Select options within the setup menus. ST70 instrument controls 4 5 4 ENTER button — Confirm menu selections. 5 CANCEL button: • Exit setup without making any changes. • Return to previous setup menu item. Display brightness and color Setting the screen brightness 1.
Choosing the screen colors Instrument pages You can choose from a range of screen color palettes, for example to suit changes in the available light during the evening. 1. Press MENU button to display the main menu. The ST70 presents instrument data on a series of pages. You have up to 8 pages available, each of which can be set up with different data types and layouts. Ma in Me n u Pa g e La yo u t Pre s s ENTER t o s e le ct . D11850-1 2.
Alternatively use the Rollover feature within the setup menu to cycle through the pages automatically. Resetting max, min and trip data Setup menu The setup menu provides a range of tools and settings to configure the ST70 instrument. Ma in Me n u The values of some data are accrued over time. These include information such a trip distance, and maximum and average speed. This type of information can be reset as and when required. With the data to be reset displayed on the instrument screen: 1.
Setting up transducers Menus available Display settings Brightness, color, units and other settings associated with the display. Page settings Customize the page layouts and information displayed. The Transducer setup menu is used to calibrate the transducers and sensors which are the source of much of the instrument data. 1. Press MENU. 2. Select Advanced options > Transducer setup. The ST70 will search for transducers connected to the system and display the results of the search as a list. 3.
• Conditions should be calm water with a slack tide. 4. When complete press ENTER to save the settings and return to the transducer setup menu. Note: It is important that there is no tide. The affect of tidal current would be to prevent an accurate speed calibration. With the list of transducers available displayed from the Transducer Setup menu: 1. Press ENTER to proceed to the transducer setup options. 2. Select Speed then Calibration from the available options. 3.
• Add point — To add a speed value to the list of calibration speeds. • Delete point — To remove a speed value from the list of calibration speeds. • Factory Reset — To reset the calibration to its factory default. 4. Delete and add points as necessary. When adding a point you will see the following: S OG: 5 . 0 KTS 1 DS T: 2 4 . 2 Hz 2 D11891-1 1 Current boat speed over ground (SOG) 2 DST Frequency (provided for information only) i.
ST70 Instrument Quick reference
www.raymarine.
