Specifications

130mm
51mm
210mm
165mm 44mm
170mm
182mm 100mm
90mm
SPX-5R SPECIFICATIONS
Power supply: 12V systems
Absolute voltage range: 10 – 16V DC
Power consumption: 250mA (Standby mode)
Thrust: 30Nm
Connections: x2 SeaTalk; x1 SeaTalk
ng
1x NMEA 0183 input / output
Maximum torque: 15Nm
Maximum recommended laden boat displacement:
Mechanical: 2000kg (4400lbs); Hydraulic: 3181kg (7000lbs)
ORDERING INFORMATION
E12220 SPX-5R Pilot
E12222 SPX-5R Pilot - no control head
S1000 SPECIFICATIONS
Power supply: 12V system
Absolute voltage range: 10 – 16V DC
Mounting methods: Surface
Weight kg (lbs): 0.4 (0.88)
NMEA 0183 inputs: 1
NMEA 0183 outputs: 1
SeaTalk connections: 1
RF transmitter and receiver: Yes
Drive: S1000 pump
S1000 FIT GUIDE (TYPICAL)
Vessel type and size: Up to 25'
Steering type (Seastar): Balanced hydraulic
Steering ram capacity: 80 – 200cc
Peak flow and rate: 800cc/min
ORDERING INFORMATION
E12169 S1000 Smartpilot wireless autopilot system with S100
remote control.
S1000 INBOARD FISHING PILOT
& WIRELESS REMOTE CONTROL
The S1000 ‘all-in-the-box’ autopilot is for powerboats with a Seastar
hydraulic system or other balanced hydraulic system (see
www.raymarine.com for steering system compatibility). Complete
with everything needed for easy installation, the S1000 is quick to fit
and simple to use. No added complications from electronic compass or
rudder reference transducers – the S1000 doesn’t need them.
Control the S1000 autopilot with the S100 wireless remote; simply
steer on to your desired heading, press PILOT to engage the pilot in to
auto and off you go. To adjust your heading at any time, simply press
the port/starboard arrow keys until the heading you want is displayed.
To disengage the pilot, press STANDBY – that’s all there is to it!
S1000 Features
• A ‘back to basics’ point and shoot autopilot.
• Designed for balanced hydraulic systems.
• No electronic compass or rudder reference transducer needed.
• NMEA input from handheld or fixed GPS/Navigator/Plotter.
• Built-in fishing patterns include cloverleaf, zig-zag and circle.
• Troll speeds as low as 1 knot (subject to environmental conditions).
• Can be linked to kicker motor.
• SeaTalk GPS/Plotter compatible.
Fishing Patterns
The S1000 Fishing Pilot incorporates a
number of dedicated fishing patterns.
Patterns include: Cloverleaf, Zig Zag and
Circle.
AUTOPILOTS
SPX-5R Features
• Install the drive unit directly on to your existing steering wheel
(tapered steering shaft behind the wheel).
• Smart Rudder Sense
TM
(SRS) enabled – Rudder Reference Transducer
not required.
• Easy to install and simple to calibrate thanks to the intelligent
Autolearn software that automatically learns your boat's handling
characteristics.
• Rate gyro built into the course computer ensures precise course
keeping.
• Ideal for trolling speed applications.
Note: Rudder reference transducer can be added to give rudder angle in auto
and standby modes.
87