MSDS

NA = Not Applicable Lithium Ion Batteries 09-16-2011 Page 3 of 3
7. SPILL OR LEAK PROCEDURES
PROCEDURES TO CONTAIN AND CLEAN UP LEAKS OR SPILLS
: In the event of a battery rupture, prevent skin contact
and collect all released material in a plastic lined metal container.
REPORTING PROCEDURE
: Report all spills in accordance with Federal, State and Local reporting requirements.
WASTE DISPOSAL METHOD: Manage in accordance with Federal, State and local requirements. Contact your battery
distributor for details regarding recycling options or visit:
http://www.rbrc.org. For additional information on disposal visit:
http://www.nema.org/gov/ehs/committees/drybat/.
8. PROTECTION INFORMATION
RESPIRATORY PROTECTION (SPECIFY TYPE) : NA
VENTILATION
Mechanical (General): NA
: Local Exhaust: NA
Special: NA
Other: NA
PROTECTIVE GLOVES
: NA
EYE PROTECTION
: NA
OTHER PROTECTIVE CLOTHING
: NA
9. SPECIAL PRECAUTIONS
HANDLING AND STORAGE
: Store in a dry place. Storing unpackaged cells together could result in cell shorting and heat
build-up. Keep battery terminals insulated when in storage or transportation.
TRANSPORTATION-SHIPPING
For USDOT regulations-see 49 CFR 173.185 and special provision 188,
: Lithium Ion rechargeable batteries are regulated during shipment by the Dept. of
Transportation (USDOT) and United Nation’s (International) requirements.
For IATA requirements-see packaging instruction 968 for battery shipments or 969 for batteries packaged
with
equipment or 970 for batteries packaged
in
For IMO requirements- see special provisions 188 and 230
equipment.
For more information, visit: http://www.nema.org/gov/ehs/committees/drybat/
10. SARA 313
Notification is not required because these products are article(s) that do not release a covered toxic chemical under the normal
conditions of processing or use.
NOTICE: The information and recommendations set forth are made in good faith and are believed to be accurate at the date of
preparation. Rayovac Corporation makes no warranty expressed or implied.