Metasys Interface Product Manual

T-2 METASYS

INTERFACE

B6000 BMS to Johnson Controls Metasys Gateway

The T-2 Metasys Interface provides certified compatibility for data sharing and program access

between the Raypak B6000 Boiler Management System and the Johnson Controls Metasys

Building Management System. The T-2 utilizes a ProSoft 1500 series communications inter-

face to facilitate low level translation between the proprietary Raypak RS-485 protocol and

Johnson Controls’ open architecture N2 protocol. The Raypak B6000 and Metasys systems

seamlessly fuse to provide a level of boiler control and monitoring capability unparalleled by

any other system at any price.

Features

• Certified N2 Metasys Compatibility

• Total B6000 BMS Program Access

• Boiler Activation/Shutdown

• Outdoor Reset Adjustment

• Setback Control

• Lead/Lag Scheduling

• Temperature Monitoring

• Boiler Fault Annunciation

• Complete Boiler Diagnostics

• Remote Troubleshooting

• All Attribute Read/Write Support

• Diagnostic LED Indicators

• Data Integrity Assurance

• 9600 Baud Data Transfer Rate

• Single Source Accountability

Catalog No. 5100.14B Effective: 02-15-03 Replaces: 06-01-97

Raypak, Inc. reserves the right to make product changes or improvements at any time without notification.

DOOR OPEN

DOOR CLOSED

PAGE 1
T-2 METASYS INTERFACE ® B6000 BMS to Johnson Controls Metasys Gateway The T-2 Metasys Interface provides certified compatibility for data sharing and program access between the Raypak B6000 Boiler Management System and the Johnson Controls Metasys Building Management System. The T-2 utilizes a ProSoft 1500 series communications interface to facilitate low level translation between the proprietary Raypak RS-485 protocol and Johnson Controls’ open architecture N2 protocol.
PAGE 2
T-2 Metasys Interface Interface Board Certified Metasys Compatibility ProSoft Series 1500 Translator RS-485 to N2 Gateway 9600 Baud Transfer Rate Read/Write Attributes Analog/Binary Total B6000 BMS Program Access Data Integrity Protocol Summation/Modulus Error Checking Auto Command Error Feedback LED Diagnostic Indicators Port 1 Port 2 Green - Active Green - Active Red - Error Red - Error Electrical Characteristics 120 VAC, 0.