Instructions / Assembly

16
5. CONTROLS
5.1. P-106 Control Adjustments
The P-106 has an analog control system. The pool or spa
water temperature is controlled by the thermostat on
the upper front panel of the heater. The control center
contains an On/O toggle switch and a thermostat. The
switch functions as a means for turning the heater On or
O.
The thermostat is tted with a means of limiting the upper
temperature limit below the maximum level. The knob
stop adjustment ring shown in Figure 19 is adjustable by
loosening the set screw, rotating the knobstop ring to the
desired location, and tightening the set screw.
HOT
COOL
Knobstop Ring
Knobstop Set Screw
Figure 19. Water Temperature Thermostat
NOTE: Maximum setpoint is 104°F (40°C).