Portable Air Conditioner Owner’s Manual Original instructions US-FA1002（Cooling Only） READ AND SAVE THESE INSTRUCTIONS
CONTENTS 1. BEFORE YOU BEGIN 2. FOR YOUR SAFETY 3. PRODUCT OVERVIEW 4. INSTALLATION 5. OPERATION 6. CLEANING AND CARE 7. TROUBLESHOOTING 8.
1. BEFORE YOU BEGIN 1.1 PRODUCT DESCRIPTION Our powerful portable air conditioners are great cooling solutions for single rooms, creating a comfortable atmosphere in your space. It also has ventilation and dehumidifying function for circulating air and removal of moisture. They're self-contained systems that do not require any permanent installation allowing you to move to the space in which it is most needed.
THE FOLLOWING SHOULD ALWAYS BE OBSERVED FOR SAFETY This appliance is intended to be used by expert or trained users in shops, in light industry and on farms, or for commercial use by lay persons. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
2. FOR YOUR SAFETY Your safety is the most important thing we concerned! WARNING 2.1 Please read this manual carefully and fully understand before operating your appliance. OPERATIONAL PRECAUTIONS WARNING- to reduce the risk of fire, electric shock or injury to persons or property: If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Do not unplug by pulling on the power cord. Do not use an extension cord or an adapter plug. Do not put objects on the unit. Do not climb or sit on the unit. Do not insert fingers or other objects into the air outlet. Do not touch the air inlet or the aluminum fins of the unit. Do not operate the unit if it is dropped, damaged or showing signs of product malfunction. Do not clean the appliance with any chemicals. Ensure the unit is far away from fire, inflammable, or explosive objects.
3. PRODUCT OVERVIEW 3.1 PRODUCT DIAGRAM 1 Control panel 4 Air inlet with air filter 6 Drainage Hole 2 Air outlet with adjustable louver 5 Caster 7 Air Exhaust 3 Handle Note: The appearance is only for reference. Please see the real product for detailed information.
3.2 FEATURES High Capacity in a compact size with cooling, dehumidifying and fan function.
4. INSTALLATION 4.1 UNPACKING Unpack the carton and take the appliance and accessories out. Check the device after unpacking for any damage or scratches on it. Accessories: 1. Exhaust hose 2. Hose connector 3. Window kit adapter 4. Remote control 5.
4.2 Choose your location If tipped more than 45°, allow the unit to set upright for at least 24 hours before start up. Place the unit on a firm, level surface in an area with at least 50cm of free space around it to allow for proper air circulation. Do not operate in close proximity to walls, curtains, or other objects that may block air inlet and outlet. Keep the air inlet and outlet free of obstacles.
4.3 ATTACH THE EXHAUST HOSE The air conditioner requires being vented outside so that the exhaust air can escape the room which coming from the appliance contains waste heat and moisture. Do not replace or extend exhaust hose which will result in decreased efficiency, even worse shut down the unit due to low backpressure. Step 1: Connect the hose connector to one end of the exhaust hose. Step 2: Connect the windows kit adapter to the other end of the exhaust hose.
windows kit firmly in place, secure the window kit with duct tape if required. It is recommended that the gap between the adapter and the sides of the window should be sealed off for maximum efficiency. Step 5: Attach the hose connector to the exhaust air outlet of unit. Step 6: Adjusting the length of the flexible exhaust hose, and avoid bends in the hose. Then place AC near an electrical outlet.
Step 7: Adjust the louver at the air outlet, and then switch on the unit.
5. OPERATION 5.
1 2 3 4 5 6 7 8 9 10 LOCK Press to turn on or turn off the child lock function. MODE Press to switch the operation mode between cooling, dehumidifier and fan. UP Increasing the desired temperature(16 ℃ ～ 32 ℃ ) or timer setting. POWER Press to switch the machine on or off. DOWN Decreasing the desired temperature or timer setting. SPEED Press to switch the fan speed between HIGH and LOW TIMER Sets a time for the unit to automatically start or stop.
5.
5.3 SETTINGS 5.3.1 Start-up and Shutdown Press POWER to turn the unit on. The unit runs in in FAN as default. Press MODE button to select the desired operation mode. Press POWER again to turn off the power. 5.3.2 Operation mode The unit has four operation modes: Cool, dry, fan, sleep. A. Cooling your room Select the cool mode to lower the temperature in your room. Press MODE button repeatedly until the LED of COOL operation lights up.
C. Drying your room Press MODE button on the control panel or remote control, the LED of DRY operation lights up. The fan speed is unable to select. User should connect the hose to the drain outlet at the bottom of the unit. Note: In this mode, the fan speed switches over to low speed and cannot be selected. D. Sleep mode （ this function can only be used with a remote control） The sleep mode can be activated when in cool mode.
5.3.3 TIMER SETTING（1hour-24hours）: The timer has two ways of operation: To turn off (When power on) Press Timer key to turn on the timer function. Press Up/Down repeatedly to set the delay OFF time. To turn on (When power off) Press Timer key to turn on the timer function. Press Up/Down repeatedly to set the delay ON time. Cancel timer Press Up/Down repeatedly until the LED shows ‘00’. Note: when press POWER will also exit the timer setting. 5.3.
5.4 DRAINAGE Self- evaporating system The self-evaporating system uses the collected water to cool the condenser coils for better efficient performance. It is no need to empty the drainage tank in cooling operation except in drying operation and high humidity conditions. The condensate water evaporates at the condenser and evacuated through the exhaust hose. For continuous operation or unattended operating in drying operation, please connect the attached drain hose to the unit.
6.1. CLEANING THE AIR FILTER (every two weeks) Dust collects on the filter and restricts the airflow. The restricted airflow reduces the efficiency of the system and if it becomes blocked it can cause damage to the unit. The air filter requires regular cleaning. The air filter is removable for easy cleaning. Do not operate the unit without an air filter, or the evaporator may be contaminated. 1. Press POWER button to switch off the unit and unplug the power cord. 2. Remove the filter mesh from the unit.
6.2. CLEANING UP OF REFRIGERANT General Measures: 1. Gas/vapor heavier than air. May accumulate in confined spaces, particularly at or below ground level. 2. Eliminate every possible source of ignition. 3. Use appropriate personal protection equipment (PPE). 4. Evacuate unnecessary personnel, isolate, and ventilate area. 5. Do not get in eyes, on skin, or on clothing. Do not breathe vapors or gas. 6. Prevent entry to sewers and public waters. 7. Stop the source of the release, if safe to do so.
7. TROUBLESHOOTING Symptom The unit is not operating. Inspection Solution Check the power connection in securely. Check if the water level indicator lights up? Check the room temperature. Check the air filter for dirt. The unit works with reduced capacity. Water Leakage Excessive Noise E0 Error Codes Check if the air duct is blocked. Check if the room door or window is open. Check if the desired operating mode is selected and the temperature is properly set.
8. DECOMMISSIONING 8.1. STORAGE Long-Term Storage - If you will not be using the unit for an extended period of time (more than a few weeks) it is best to clean the unit and dry it out completely. Please store the unit per the following steps: 1. 2. 3. 4. 5. 6. Unplug the unit and remove exhaust hose and window kit store with the unit. Drain the remaining water from the unit. Clean the filter and let the filter dry completely in a shaded area. Re-install the filter at its position.
Website:https://www.elecwish.com/ Customer Service Email: aftersales@elecwish.com Customer Service Phone: #9519343021 Please don't worry about the after-sale service, you can contact us at any time for any issue.
