User Manual

RaySafe ThinX RAD
USER MANUAL
RaySafe ThinX measures X-ray radiation. The instrument is always
on, triggered by radiation. You don’t need any correction tables,
since the active compensation feature automatically applies correc-
tions for variation in beam filtration.
BATTERY REPLACEMENT
When the yellow LED is blinking,
please replace the battery:
1. Remove the battery cover.
2. Replace the battery (CR2450).
3. Put the cover back. The instru-
ment is ready to use.
CLEANING
Use a damp cloth for cleaning.
INSTRUMENT VERSIONS
This manual is valid for 1302024-A, 1302025-A and 1302026-A.
SUPPORT
Do not hesitate to contact Unfors RaySafe for support:
Technical support
[phone]
[e-mail]
Service
[phone]
[e-mail]
2
1
3
Position RaySafe ThinX with the sensor area
centered in the X-ray field.
Expose.
Read the values on the display.
If the detected waveform is pulsed, the num-
ber of pulses will automatically be displayed.
© 2012.08 Unfors RaySafe 5000094-B