Quick Start

QUICK GUIDE

RaySafe X2

YOUR RAYSAFE X2 SYSTEM

X2 Base Unit

X2 Sensors

X2 View

Cables

Flexi Stand

BASE UNIT, SENSORS AND ACCESSORIES

Further instructions for use can be found in the base unit. Press

the menu button and select Help.

X2 VIEW

X2 View help can be accessed in the program’s Help menu.

CALIBRATION DATE

Press the “i” icon for the connected sensor, found in the Setup

screen in the base unit, to get the calibration date.

MEASUREMENT SPECIFICATIONS

Swipe right when viewing a single parameter to read measurement

speciﬁcations for that parameter. Visit http://www.raysafe.com for

complete instrument speciﬁcations.

TECHNICAL SUPPORT

Please don’t hesitate to contact our support desk if you have any

questions. Visit http://www.raysafe.com for contact information.

LEARN MORE

Power Supply

PAGE 1
YOUR RAYSAFE X2 SYSTEM LEARN MORE Cables BASE UNIT, SENSORS AND ACCESSORIES Further instructions for use can be found in the base unit. Press the menu button and select Help. X2 VIEW X2 View help can be accessed in the program’s Help menu. RaySafe X2 Flexi Stand X2 Base Unit Power Supply MEASUREMENT SPECIFICATIONS Swipe right when viewing a single parameter to read measurement specifications for that parameter. Visit http://www.raysafe.com for complete instrument specifications.
PAGE 2
GETTING STARTED NAVIGATING THE BASE UNIT Note! To change the base unit language, swipe right from Home screen (Setup screen), press X2 Base Unit, and select language. Turn on the base unit Connect a sensor Position and expose Menu Home Back Power RAYSAFE X2 VIEW Press the power button shortly to enter sleep mode. After a while in sleep mode, the base unit will turn off automatically. Press the button for 2 seconds to turn it off immediately.