Users Manual

Bullet Camera InstallationBullet Camera Installation
Ceiling Mounting
Expansion Bolt
Mounting Screws
Insert three expansion bolts in place into the ceiling and fix the
equipment with three m screws.ounting
Completion of Installation
Vandal Proof Dome Camera Installation
-Vandal Proof Dome Camera Installation-
Ceiling Mounting
Apply the position sticker to the desired camera mounting position.
Position Sticker
HD Network Camera
Quick Start Guide
Attention:There are two connection modes:
1. For non-PoE router,pls connect the camera by a PoE switch or a PoE injector.
2. For a POE NVR,pls connect the camera directly to the POE NVR, then follow the below steps.
06
Dome Camera Installation
Ceiling Mounting
Setup of Sticker
Dome Camera
Remove the collar off the camera by rotating it down
Collar
Expansion Bolt
Locking Screw
Fix the pedestal by drilling locking holes around the sticker and inserting
three expansion bolts into the holes and fastening it with three locking
screws.
Adjust it to an appropriate angle.
Mount the collar back by rotating it up
Completion of Installation
Camera Connection Diagram
Installation
Paste the sticker in place at the proper
position as selected.
Wireless
RS-CH728H4C-WA28PW