User's Manual

5
 Trouble shooting
Question Possible cause How to resolve
Need to install software for first
use of this product?
No need
Need to link ID before first use? No need
Possible to use 2 or more of this
product in a room at the same
time?
Yes, but please implement ID Link in
advance to avoid interference (see
“ID Link” for how to link)
Possible to use one presenter
with 2 or more USB receivers?
Yes but only when the presenter and
USB receivers are not conducted ID
Link
Laser pointer malfunction
1. Continued pressing of the laser
button over 30 second
2. Battery power is running out
1. Press the laser button again
2. Replace with new batteries
Remote control malfunction
1. Continued pressing of the
function button over 30 seconds
2. Interfered by other RF signal
1. Press the function button again
2. To Implement ID Link (see “ID
Link” for how to link)
Laser pointer and remote control
both malfunction
Batteries are inserted in wrong
direction or battery power run out
Check the insert direction of
batteries and battery power
 Specifications (Note Design and specifications are subject to change without notice.)
Frequency range : 2400~2483MHz
Remote range : Approx. 160 feet (50 meters) line of sight
Operating voltage : 2.4V~3.2V
Power consumption: Normal operation < 10mA
Red laser operation < 30mA ; Green laser operation < 310mA
Sleep < 10uA
Power : AAA battery x 2
Output power : Under 1mW
Size : Presenter – 115 (L) x 38 (W) x 25 (H) mm ; USB receiver - 33.6 (L) x 16 (W) x 3.5 (H) mm
Weight : Approx. 33 grams (include USB receiver and Red laser)
Approx. 40 grams (include USB receiver and Green laser)
Operating temperature : 0°C (32°F) ~ 60°C (140°F)
※ Optimum operating temperature for green laser : 15°C(59°F) ~ 35°C(95°F)
Operating humidity (non-condensing) : 10%~85% RH
Red Laser :
Semiconductor laser (λ= 650nm), Emission duration : Continuous
Laser output power : Max. 0.95mW
Green Laser :
Semiconductor laser (λ= 532 nm), Emission duration : Continuous
Laser output power : Max. 0.95mW