User's Manual

If you have several RF devices within range and working at the same channel, the

presenter is jammed evidently, you need to change RF ID for better communication quality.

Please do as follows:

1. Press the ID link button on the receiver and the LED lights up steady. This means the

receiver is ready for linking.

2. Press the Fn and Link keys on the Presenter simultaneously for more than three

seconds. The LED on the receiver begins blinking to confirm a successful link.

Note: Whenever you change the batteries, we recommend you to implement the

procedure given above.

Now, your 3-in-1 Wireless Presenter is ready to go.