User's Manual

Chapter 2 Getting Started and Operation Mode

 Inserting the batteries

Open the battery cover in the product rear side and insert two AAA batteries.

 Connecting the USB receiver

Take out the USB receiver in the back (please refer to page 7), label side down

and plug it exactly into an USB port. Do as follows, depending on operating

system:

 Windows® 2000/XP/Windows Vista™

The operating system identifies the receiver as a “USB Human Interface

Device” and begins installation automatically. Follow the instructions or

messages on the screen to complete the installation.

 Windows® 98 SE/ME

The system prompts you to insert the operating system CD-ROM. Follow the

instructions on the screen to install the required drivers.

 Opening PowerPoint and other necessary files on your screen

 Turning on the laser pointer

Press “Fn” and “On/Off” button on the product front simultaneously till the

Upper-left LED blinking in orange.

 Operation Mode

There are two operation modes: One is 『PowerPoint Presentation Mode』,

another is『Multimedia Mode』,

UDefault setting in 『PowerPoint Presentation

Mode』U. Please make sure you are on the right mode you want.

Note: There are 3 LED on the product front which combines 4 modes below:

1 Orange LED blinks: At PowerPoint mode and laser pointer is turned on.

2. Blue LED blinks: At Multimedia mode

3. Red LED lights: Light when battery power is low.

PS Please change to new batteries to have normal function.

4. No LED blinks or lights: At PowerPoint mode and laser pointer is not turned on.