Owner manual

12
Raytec Global (excluding Americas) - Tel: [phone] [e-mail]
Raytec Americas - Tel: [phone] Toll Free: [phone] [e-mail]
www.rayteccctv.com
Expand Advanced Configuration->MIP Plug-ins->Raytec Vario IP->Groups and right click
on the Groups node and select “Create New”, the following screen will be displayed.
This is the new group configuration screen. It will allow you to create a group and configure
how it responds to events from the XProtect system.
Group Name - Required
The name of the group, which will be seen in the management application and in the smart
client. It should be named in a way that will allow the user to identify quickly the location
and/or function of the group.
Group Description – Optional
Provides a description of this group. This is not shown anywhere else in the application and
serves only for notes and information about this group.
Lamp Control Option – Covered in section 6.4
This section allows you to configure the actions for the illuminators. Detailed instructions
are covered in section 6.4
Once you have set-up your groups you are ready to start adding your VARIO IP illuminators
to them.