Owner manual

20
Raytec Global (excluding Americas) - Tel: [phone] [e-mail]
Raytec Americas - Tel: [phone] Toll Free: [phone] [e-mail]
www.rayteccctv.com
7 Lighting Operation in the Smart Client
Your operators will be using the XProtect Smart Client for their day to day operation of the
system. The VARIO IP illuminator integration will allow them to control the configured
illuminators from this application. Note that at this stage, no user intervention is required in
terms of set up, when the system is correctly configured to use events (see section 5.3);
though they can still control the lights by group or individually should they need to.
7.1 Operating Groups Manually
Groups of Illuminators can be operated manually from the XProtect Client.
This temporarily overrides any event configuration, until timed out.
Open the XProtect Smart Client application
On the left hand side there will be a section called MIP Plug-ins
Locate the Vario IP Side Panel in this list
Select a group from the list