Bracket Guide

WB1 WALL BRACKET
Designed to mount Raytec illuminators to walls or to Raytec PBC brackets (see page 3 and 4) to provide full pan/tilt adjustment
when used with AI circular bracket.
Assembly Notes: Mount WB1 to wall or Raytec PBC-1/
PBC-2. Mount illuminator to WB1 as shown below. Set the
vertical/horizontal angle of illumination then tighten screws.
www.rayteccctv.com
3
UK Tel: [phone] Fax: [phone]
Americas Tel: [phone]